AOC 210V Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor AOC 210V. AOC 210V 20 halaman.

Technical Support

Frequently Asked Questions

Problem & Question

Power LED Is Not ON

No Plug & Play

Picture Is Fuzzy & Has Ghosting Shadowing

Problem

Picture Bounces, Flickers Or Wave Pattern Is

Present In The Picture

Monitor Is Stuck In Active Off-Mode"

Missing one of the primary colors (RED, GREEN,

or BLUE)

Screen image is not centered or sized properly

Picture has color defects (white does not look

white)

Horizontal or vertical disturbances on the

screen

Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to

the monitor.

In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video

card. Check with your computer manufacturer. Also check the monitor's video cable and make sure none of the

pins are bent.

Make sure the AOC Monitor Drivers are installed (AOC Monitor Drivers are available at : http://www.aoc.com)

Adjust the Contrast and Brightness Controls.

Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to

the video card output connector on the back of your computer.

Move electrical devices that may cause electrical interference as far away from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution your are using.

The Computer Power Switch should be in the ON position.

The Computer Video Card should be snugly seated in its slot.

Make sure the monitor's video cable is properly connected to the computer.

Inspect the monitor's video cable and make sure none of the pins are bent.

Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the

CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.

Inspect the monitor's video cable and make sure that none of the pins are bent.

Make sure the monitor's video cable is properly connected to the computer.

Adjust H-Position and V-Position or press hot-key (AUTO).

Adjust RGB color or select color temperature

Use win 95/98 shut-down mode Adjust CLOCK and FOCUS or perform hot-key (AUTO-key )

Possible Solutions