cascade corporation J Series Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Listrik cascade corporation J Series. cascade corporation J Series 18 halaman.

Halaman Cetak
I
NSTALLATION

Truck Requirements

Truck Relief Setting
2300 psi (160 bar) Recommended
2500 psi (170 bar) Maximum
Truck Flow Volume
J-Series
Cascade J-Series Integral attachments are compatible with
➀
SAE 10W petroleum base hydraulic fluid meeting Mil. Spec.
MIL-0-5606 or MIL-0-2104B. Use of synthetic or aqueous base
hydraulic fluid is not recommended. If fire resistant hydraulic
fluid is required, special seals must be used. Contact
Cascade.
Flow less than recommended will result in reduced system
➁
performance.
Flow greater than maximum can result in excessive heating,
➂
reduced system performance and short hydraulic system life.

Auxiliary Valve Functions

Check for compliance with ANSI (ISO) standards:
Sideshifter or Fork Positioner
GA0387.eps
Swingshift & Fork Position
Slope Pile & Fork Position
GA0082.eps
8
➀
Recommended
Min.
➁
15 GPM
25 GPM
(95 L/min.)
(56 L/min.)
Tilt
Forward
Open Forks
Hoist Down
Sideshift Left
Hoist Up Tilt Back
Close Forks
– OR –
Sideshift Right
Swingshift Left
– OR –
Tilt Forward
Slope Pile CCW
Open Forks
Hoist Down
Close Forks
Hoist Up
Tilt Back
Swingshift Right
– OR –
Slope Pile CW
Max.
➂
35 GPM
(132 L/min.)
– OR –
Sideshift & Fork Position
Sideshift & Independent Fork Control
Sideshift & Swingshift
Sideshift & Slope Pile
GA0358.eps
FP1166.eps
Open Left Fork
Open Right Fork
Swingshift Left
Tilt Forward
Slope Pile CCW
Sideshift
Left
Hoist Down
Hoist Up
Sideshift
Right
Tilt Back
Close Left Fork
Close Right Fork
Swingshift Right
Slope Pile CW
6082563-R2 EN
Open Forks
– OR –
– OR –
– OR –
– OR –
Close Forks
– OR –
– OR –
– OR –
– OR –