Addictive Desert Designs F1503452580103 Panduan Petunjuk Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mobil Addictive Desert Designs F1503452580103. Addictive Desert Designs F1503452580103 6 halaman. 2007-2014 tahoe/suburban/avalanche stealth front bumper with grille
Halaman CetakINSTALLATION
1. If you purchased any lights with your bumper, now is a good time to install those. Follow the light
manufacturer's instructions for mounting and lighting information.
2. Line the mounting holes on the bumper up with the mounting holes on the vehicle's frame horns. We
use one vertical through bolt and one horizontal through bolt (per side). The longer of the supplied bolts
(5 1/2" long) must get used as the vertical bolts. The remaining 5" long bolts get used as the horizontal
through bolts. Leave these bolts finger tight for now. (Fig J)
3. Once all bolts are in place, line the bumper up so that it is straight in relation to the headlights/fender.
Then, tighten the mounting bolts to 70 foot pounds.
4. Trim the inner fender liners to preference. We recommend following a line similar to what is shown in
Fig K.