Danelectro N-10 Honeytone Mini Amp Panduan Pemilik - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Danelectro N-10 Honeytone Mini Amp. Danelectro N-10 Honeytone Mini Amp 2 halaman.
Halaman Cetak
1.
Insert instrument cable into IN jack.
2. Use 9V battery or 9 Volt AC adaptor.
Adaptor specification: Center Negative, 9 Volt, 300mA
maximum. Snark SA-1 adaptor is recommended..
3. Turn on the amplifier using the OFF/VOLUME control.
Set VOLUME to desired setting.
4. Adjust TONE control for desired bass/treble setting.
5. Adjust O. DRIVE control for desired distortion.
6. To use HEADPHONE, connect plug from Walkman®
type headphones to the HEADPHONE jack.
7. When sound quality or volume level is degraded,
replace the battery.
Caution: Loud volume levels through speaker or headphone can
cause hearing damage. Please use appropriate volume levels.
CONTROL SETTINGS
CLEAN & SPANKY
VOLUME
TONE
G IN
IN
MINI AMP
WARM JAZZ
VOLUME
TONE
G IN
IN
BIG AMP OVERDRIVE
VOLUME
TONE
G IN
IN
DISTORTED RHYTHM
VOLUME
TONE
G IN
IN
WOODSTOCK FUZZ
"SEND THE CATS UNDER THE BED"
VOLUME
TONE
G IN
IN
TWANG
VOLUME
TONE
G IN
IN
KILLER BLUES
VOLUME
TONE
G IN
IN
THICK SOLO
VOLUME
TONE
G IN
IN
VOLUME
TONE
G IN
IN
MONDO SUSTAIN
VOLUME
TONE
G IN
IN