3R system K Series Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kandang 3R system K Series. 3R system K Series 2 halaman.

Halaman Cetak
How to connect cables
Functions
* 1-channel temperature monitor
* 1-channel fan speed control
* Auto fan speed control
▶ 40℃ : Low
50℃ : Mid
60℃ : High
* Immediate visual indication of Fan/HDD operation
* On-board Power & Reset Switch
Buttons
* LCD RESET : Resets to default settings
LCD RESET
LCD SELECT
* LCD SELECT : Switches fan speed from Low to Mid to High
* POWER SW : System Power Switch
POWER
RESET
* RESET SW : System Reset Switch
MODE
RESET
Functions
* 1-channel temperature monitor
* 2-channel fan speed control
* 6-level fan speed control (manual)
* Fan speed storage function
* Auto fan speed control
▶ 40℃ : Low
50℃ : Mid
60℃ : High
* Immediate visual indication of Fan/HDD operation
* Displays system running time
Buttons
* LCD RESET : Resets to default settings
* MODE : Switches fan control channels
* UP : Increases fan speed (level 1 → level 6 → Auto)
* DOWN : Decreases fan speed (level 6 → level 1 → Auto)
How to connect cables
UP
DOWN
4-pin Power Supply Connector : Connect this to PSU.
(Only available for the LCD product)
Fan Power Connector : Connect this to the 3-pin Fan
provided in the case.
(Only available for the LCD product)
Thermal Probe : Place this sensor to the proper place to
measure the temperature inside the case.
* Do not place the sensor on CPU core, or Heatsink.
* If there is the gap between cooler base and CPU
core because of the wire of the sensor, CPU may
be damaged.
* If there is cooler guide, the cable of the sensor
should be replaced under the cooler guide to
avoid the disconnection.