Danfoss AB-PM DN 100 Lembar data - Halaman 4

Jelajahi secara online atau unduh pdf Lembar data untuk Pengontrol Danfoss AB-PM DN 100. Danfoss AB-PM DN 100 12 halaman. Pressure difference controller with integrated flow limiter

Halaman Cetak

Data sheet

Application

-variable flow systems

4 | VD.HR.D1.02

AB-PM DN 40-100

Zone 1

Heating/

cooling

station

Fig. 2 Staged commissioning – 1st stage : ensuring Δp and flow for each zone

AB-PM DN 40 to 100 is the ideal solution for

applications where a so called staged installation,

hand over and commissioning is used. In such

cases, the 1

stage is installation of backbone

piping without terminal units. AB-PM is used as

DPCV with flow limitation, ensuring the specified

design pressure and flow to each zone. The 2

stage is then the installation of terminal units.

DPCV: several fancoils with

individual room control

Fig. 3 Staged commissioning – 2nd stage : Installation of terminal units

In the 2

stage of commissioning the installation

of terminal units can be done. Optionally the

AB-PM can be changed from differential pressure

controller to pressure independent control valve.

This allows flexibility when designing the zones.

If only one terminal unit is used in the zone, the

AB-PM as a PIBCV can be used to control that

unit and no additional valves are needed.

Zone 3

Zone 2

Zone 4

Typical applications are shopping malls and shell

& core office buildings.

The AB-PM ensures the required flow for each

zone and maintains hydronic balance in the

system.

PIBCV: zone control for

one terminal unit

Zone 6

Zone 5

DPCV: Zone control

for several fancoils