Abu Garcia Max X Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Kabel dan konektor Abu Garcia Max X. Abu Garcia Max X 7 halaman.
Halaman Cetak
REMOVING THE SIDEPLATE
Max™ reels are equipped with a removable palm sideplate that allows access
to the spool. To open the sideplate, gently pull on the sideplate pin head to
slide it outward. Twist the sideplate in an upward motion until it reaches
the stop position. The sideplate can now be removed.
REEL FUNCTION
How to Adjust the Braking System: Max™ reels feature the adjustable MagTrax™
magnetic brake system that delivers excellent casting control. For maximum casting
distance and minimal tendency of line over run, it is necessary to adjust the braking system
to match the weight of the lure and angler preference.
The MagTrax™ magnetic brake delivers consistent braking pressure throughout the entire cast resulting in smooth, controlled
casts. A turn of the dial towards the "MAX" setting moves the magnetic braking system closer to the spool. As the magnets get
closer to the spool, they apply more braking force and slow the rotation of the spool. Turn the exterior MagTrax™ brake dial to
fine tune spool tension. Rotate the dial towards the "MAX" label to increase braking force or in the opposite direction
to reduce braking force.
The Flipping switch (found only on the STX model) is used for easy one handed operation. When the flipping
switch is turned on, it allows the thumb bar to returned to the dis-engaged position once it has been released.
BASIC CASTING TECHNIQUE
a) Depress thumb bar while keeping the tip of the thumb on the spool to control the lure. Hold the rod and reel so that that handle is pointing upward.
b) Holding the rod and reel in front of the body, bring the rod backward so the tip reaches a point above and behind the shoulder. To cast, bring the rod back in
front of the body in a single motion without stopping
c) Release the thumb from the spool as the rod is brought forward so that the lure is launched slightly upward and outward toward your target. As the lure
approaches the water surface stop the spool with your thumb. If you don't stop the spool as the lure hits the water, the spool will continue to rotate causing a
backlash (a.k.a bird's nest)
In the event that you experience backlashes, tighten the spool tension knob ½ a turn at a time to apply more braking force until you no longer have an issue
with line overrun. Also try casting with the wind – instead of against it – until you get comfortable casting without experiencing a backlash. As you get more
comfortable casting, reduce the amount spool tension by rotating the spool tension knob ¼ turn at a time to maximize casting distance.
MAX FAMILY LP MANUAL
abugarcia.com