Airvolution Esatto ESL60D2S Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Airvolution Esatto ESL60D2S. Airvolution Esatto ESL60D2S 19 halaman. Slide-out rangehood 60 cm

Halaman Cetak

Unpacking

• This product has been packaged to protect

it against transportation damage. Unpack

the appliance and remove all packaging

materials from around the rangehood. Keep

all packaging materials until you have made

sure your new rangehood is undamaged

and in good working order. The carton is

recyclable. Whenever possible, reuse the

carton and recycle it when disposing of

the packaging materials.

• Plastic wrapping can be a suffocation hazard

for babies and young children, so ensure all

packaging materials are out of their reach,

and dispose of them safely.

Important installation advice

WARNING!

• All electrical work associated with the

installation of this rangehood must be carried

out by a licensed electrician.

• This rangehood must be correctly installed by

a suitably qualiﬁ ed person in strict accordance

with all applicable rules and regulations and

following the instructions in this manual.

• Do not try to install the rangehood yourself;

doing so will expose you to danger and void

the warranty. Improper installation, adjustment,

alteration or service can cause injury or

damage. We decline any responsibility for

injury or damage, to persons or property, as a

result of improper installation.

Before Installation:

DUCTING

RECIRCULATING

External Outdoor Ducting Mode

Recommended wherever possible for optimal

performance

. Remove the aluminium grease ﬁ lters (Fig 6. on

page 10) from the underside of the rangehood.

Turn the switch in the centre of the motor

housing to "External Outside Ducting" position

(Fig. 1)

. Clip in the plastic Front Vent Cover (part ID 7,

installation kit) over the vent holes on the front

of the rangehood.

. Using the screws provided, install the Flu

Outlet Adaptor (Part ID 8, Installation kit)

to the top of the rangehood

. Install the ducting pipe (not supplied) to the

outlet on the top of the rangehood and

vent to external air. It is recommended that

the ducting pipe is 120mm in diameter.

White Plastic Cover

• When choosing the outdoor exhausting mode,

you can cover the front outlet (part ID ) with

the white plastic cover. (ﬁg. ).

Fig. 1

Fig. 2

Fig.