3rd Power CLEAN SINK MKII Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Alat Musik 3rd Power CLEAN SINK MKII. 3rd Power CLEAN SINK MKII 12 halaman.

Back Panel (continued):

8-OHM Speaker Outputs (3)

The 8-OHM SPEAKER OUTPUT is connected to the internal speaker via a short patch cable.

4-OHM Speaker Outputs (4)

The 4-OHM SPEAKER OUTPUTS are wired in parallel. They are provided for connecting your ampliﬁer

to a single 4-OHM speaker, or two 8-OHM speaker cabinets.

OPERATIONAL NOTES:

• When operating an external 8-ohm cabinet along WITH the internal speaker, you will need to

remove the internal speaker patch cable from the 8-ohm jack and insert it into one of the 4-ohm

jacks and then connect the external cabinet to the remaining 4-ohm jack.

• REMEMBER to be sure and reconnect the internal speaker patch cable to the 8-ohm jack when

you return to operating only the internal speaker.

SAFETY NOTES:

• Never operate your ampliﬁer without a connected speaker cabinet. This will damage your tubes

or transformers - or both.

• Always operate your ampliﬁer with the proper impedance output that matches your speaker cab-

inet(s).

• In all cases, always use a good quality heavy gauge speaker cable (not a shielded instrument ca-

ble) to connect your CLEAN SINK to external speaker cabinet(s).