AOC Spctrum Series Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor AOC Spctrum Series. AOC Spctrum Series 16 halaman.

POWER CORD

Power Source:

1. Make sure the power cord is the correct type that required in your area.

2. This monitor has a universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area ( No user adjustment is required. )

3. Connect the power cord into your monitor' s power input socket, and then

plug the other end into a 3-pin AC power outlet. The power cord may be

connected to either a wall power outlet or the power outlet socket on your PC,

depending on the type of power cord supplied with your monitor.

CONTROLS AND CONNECTORS

VIDEO CABLE

Connecting the Video Cable: the monitor comes with a built-in video cable.

Plug the signal cable's 15-pin connector into the computer's video port and

tighten the two screws on the cable connector. (see figure 2)

Caution: Don' t bend the signal cable, otherwise it will break the inner wire.

Connecting the Power Cord: Plug the power cord into the monitor's AC power

socket. Then plug the power cord into a grounded AC outlet or UL-approved

power strip or the power output socket on your PC.

Caution: If the AC outlet is not grounded, install the proper grounding adapter

(not supplied).

Connecting the Audio Cable ( 7KlrA only ): Plug audio cable between the

computer multi-media (or sound) card's audio output and monitor's audio input.

Connecting the DC Power Cable ( 7KlrA only ): Plug DC power cable

between monitor to swivel base for audio power

Power Cord

Signal Cable

VGA Card Adapter

F1795+

Figure 2

Connecting Cables

PC Audio Output

DC Output

7KlrA