DUKWIN DK Series Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Aksesori DUKWIN DK Series. DUKWIN DK Series 15 halaman. Watch winder

3. The 3-20 ﬁngerprint accounts setting:

The ﬁngerprint entry steps are the same as the method for entering the

second administrator ﬁngerprint account.

6.1.2 Using Admin Key Setting Mode

Insert the key, short press the key button once, then the blue light will ﬂash 3

times, indicating that you can enter your ﬁngerprint: Using the ﬁngerprint you

deﬁned as an administrator, input 6 valid presses continuously on the panel,

the blue light will ﬂash once every time you press it, until the system collects

your ﬁngerprints 6 times, the blue light will be on for 2 seconds, indicating

that the ﬁrst ﬁngerprint entry is successful.

Note:

The mode of using the admin key is not required administrator ﬁngerprint

conﬁrmation during any ﬁngerprint entry process.

6.2 Fingerprint Accounts Remove/Reset

The mode of using the admin key is not required administrator ﬁngerprint

conﬁrmation during any ﬁngerprint entry process.

1. Using Fingerprint Veriﬁcation

Press and hold the sensor with any ﬁnger, do not release your ﬁnger, the blue

light will ﬂash 3 times during the period, do not release your ﬁnger, continue

to press, then the red light will ﬂash 3 times, prompting you to enter the

administrator ﬁngerprint twice, each valid press will be accompanied by the

pink indicator light indicates that the veriﬁcation is successful. After releasing

the ﬁnger, the blue light stays on for 2 seconds, indicating that all ﬁngerprints

have been cleared and the factory mode is restored.

2. Using Admin Key

Insert the key, press and hold the key button for about 5 seconds, the blue

light is always on, when the pink light is displayed, it means that all ﬁngerprints

have been cleared, and the factory mode is restored.

(If you have any questions, check out our YouTube video link)