Duluth Forge FVFLC18-2 Panduan Petunjuk Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Perapian Duluth Forge FVFLC18-2. Duluth Forge FVFLC18-2 8 halaman. Vent-free gas logs
Juga untuk Duluth Forge FVFLC18-2: Panduan Petunjuk Instalasi (9 halaman)
Halaman Cetak
WARNING: Failure to position the parts in accordance with these
diagrams or failure to use only parts specifically approved with this
heater may result in property damage or personal injury.
CAUTION: After installation and periodically thereafter, check to
ensure that no yellow flame comes in contact with any log. With the
heater set to High, check to see if yellow flames contact any log. If
so, reposition logs according to the log installation instructions in
this manual. Yellow flames contacting logs will create soot.
It is very important to install the logs exactly as instructed. Do not modify logs. Use only logs
supplied with heater.
Each log is marked with a number. This number will help you to identify the logs when installing.
After installing logs, add decorative cinders around the grate base, do not place any decora-
tive cinders on logs or burner.
1. Place log #1 onto shelf at rear of the grate
assembly. The features on bottom of log
will correctly locate the log.
4
INSTALLING LOGS
Middle Log
Bracket
Front Log Bracket
MODEL FVFLC18 - 1
Log #1
www.factorybuysdirect.com
2. Insert log #2 into slot in middle log bracket.
Log #2
Rear Log
Bracket
200235-01C