Dulux RapidFish D500 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penyemprot Cat Dulux RapidFish D500. Dulux RapidFish D500 20 halaman.

Halaman Cetak

Pour solvent

water'

(depending

on the coating

material

used) into the container

and

screw

the

container back on.

10.

11.

12.

13.

Flamm

able materials

with a flash

point below 23°C

should

not be used to

clean

the device.

Reassemble

the device.

Insert

the

power

plug

into

the electrical socket.

Turn

the device on and spray

the

solvent or water into

container or a cloth.

Repeat steps 6 to

above until the solvent or water emerging from

the nozzle

clear.

Turn

off the

device

and remove the power

plug from

the

electrical

socket.

Unscrew the container and empty

of any remaining solvent or water.

Pull

out the suction

tube

with the container seal

•

Never clean seals,

diaphragm

and

nozzle

or air holes of the spray

gun

with

metal

objects.

The

ventilation hose and diaphragm are only solvent-resistant to a limited

extent.

Do not immerse in

solvent, only wipe.

14.

Pull

the ventilating

hose (figure 11A)

out

from the

FIGURE

top

of the spray gun

body, unscrew

the valve cover

(figure

118)

and remove the

diaphragm (figure 11C)

15.

Clean all of these

parts

carefully.

Never hold the device

rear part

under

water or

immerse it into

quids.

Clean

the housing

only with a

moistened

cloth

16.

Clean

the

outside of

the

spray gun and container

with a cloth soaked in solvent or water.