Dulytek DHP5 Series Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Dulytek DHP5 Series. Dulytek DHP5 Series 15 halaman.

INSTRUCTION MANUAL: DHP5

OPERATING INSTRUCTIONS

TURNING OFF

PRESS

CLEANING

PRESS PLATES

ROSIN PRESSING TIPS

PLANT

MATERIAL

Dulytek Equipment

www.dulytek.com

1. Remove the pump handle

2. Turn the machine off by flipping ON / OFF switch when done pressing.

3. Unplug and then disconnect the AC power cord from the press.

4. Wait until the press cools down completely to clean and store it.

1. Make sure the press plates are completely cooled down before cleaning.

2. Apply a small amount of alcholol to a clean cloth and wipe down the plates

until clean. Use rubbing alcohol that contains at least 80% by volume of

isopropyl alcohol.

3. Wipe plates with a dry clean cloth.

4. Repeat these steps for cleaning all associated tools.

For the optimal yield and quality, select plant material that has been harvested

within 2 to 6 weeks of pressing.

Maintain your plant relative humidity at around 62%. Store your herbs in an

airtight containers with two-way humidity packs in a dark place. Allow at least

48 hours for the material to reach the optimal humidity level. Open the jars one

or two times per day to air them for a few minutes before re-sealing.

Grind or break up your starting material and compact it into a puck using a pre-

press mold.

Placing a puck into a filter bag is descretionary. Filter bags help to produce a

high quality concentrate by removing plant contaminants from rosin. Pressing

without a filter bag results in a higher yield and a lower quality product.

Don't try to put too much material inside the filter bag; doing so may cause filter

bag blowout and reduce your yield.

Insert the puck into a filter bag if used and place it inside a folded parchment

(continued)

from the pump handle socket

PAGE 10