Danfoss VLT MCD 600 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol Danfoss VLT MCD 600. Danfoss VLT MCD 600 8 halaman. Remote control panel and mounting kit

Halaman Cetak

Installation guide | Remote VLT® Control Panel LCP 601 and

Mounting Kit

2 Installation

2.1 Installing the Expansion Card

Context:

SHOCK HAZARD

The soft starter contains dangerous voltages when connected to mains voltage. Attaching or removing accessories when the

soft starter is connected to mains may cause death or serious injury.

Isolate the soft starter from mains voltage before attaching or removing accessories.

RISK OF INJURY AND EQUIPMENT DAMAGE

Inserting foreign objects or touching the inside the soft starter while the expansion port cover is open may endanger

personnel, and can damage the soft starter.

Be careful when installing the expansion cards and make sure not to touch the inside the soft starter.

Procedure

1. Push a small flat-bladed screwdriver into the slot in the center of the expansion port cover and ease the cover away from the soft

starter.

2. Line up the card with the expansion port. Gently push the card along the guide rails until it clicks into the soft starter.

W A R N I N G

C A U T I O N

Installation

AN265232431650en-000101 / 175R1177