3SIXT 3S-1667 Petunjuk Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Pembicara 3SIXT 3S-1667. 3SIXT 3S-1667 4 halaman.

OPERATION

Charging up your Speaker

1. Connect the provided power pack & power cable together.

2. Locate the charging input (7) on the Infinity speaker.

3. Make sure that the Charging Input (7) is clear of any obstruction (dirt/dust etc).

4. Plug the Power pack connector end into Infinity Speaker's Charging Input (7), making sure to lightly

push it in (do not push with excessive force).

5. Connect the AU plug end of the Power pack into the wall outlet, making sure to lightly push it in (do

not push with excessive force).

6. Turn power on at the wall socket. A small LED will illuminate on the next to the Touch control bar

indicating that it is charging up successfully. The small LED will extinguish when the Infinity speaker is

fully charged and is ready to be used.

7. To stop charging simply switch off from the wall socket or remove your charging cable from the

Infinity Speaker Charging input (7).

8. If the Infinity speaker sits idle charging, not paired or connected & not playing music, it will

automatically turn itself off to conserve power after 10 minutes.

Powering On

1. Locate the Power On/Off button on the top of the Infinity speaker (5).

2. Press the Power On/Off button (5) to turn on.

3. The Infinity speaker will make an audible sound and immediately activate pairing mode. The working

Status LED (3) will breathe in two second intervals.

Powering Off

1. Locate the Power On/Off button on the top of the Infinity speaker (5).

2. Press the Power On/Off button (5) once to turn on.

3. The Infinity speaker will make an audible sound and shut down. If still charging the working LED will

remain on (3).

Pairing (first time)

1. Follow 'Powering On' directions from step 1 to 3.

2. Locate your Bluetooth settings menu on your device and make sure it is on. Search for your specific

'3SIXT infinity' speaker.

3. Once located select the Infinity Speaker and auto pairing should occur. If prompted for a password,

input "0000".

4. If successfully paired the Infinity speaker will make an audible sound and the working status LED (3)

will remain solid.

Unpairing

1. Locate your Bluetooth settings menu on your device and search for '3SIXT infinity.

2. Locate the settings or information setting within your paired device and select "unpair or forget this

device".

4. The Infinity Speaker will make an audible sound to indicate it has unpaired and will resume pairing

mode with the working status LED (3) breathing in two second intervals.

www.3sixtgear.com

or visit www.3sixtgear.com/support