Danfoss 176F6746 Panduan Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Penggerak DC Danfoss 176F6746. Danfoss 176F6746 6 halaman. Cable clamp kit for e3h/e4h drives vlt fc series fc 102, fc 103, fc 202, and fc 302
Halaman Cetak
Installation Instructions
Removing the Terminal Cover
The lower cover panel and terminal cover at the bottom part of the drive are required to maintain the IP20/Chassis protection
rating. Remove the lower cover panel and terminal cover before installing the cable clamp kit. Refer to Illustration 1.1.
1.
Unfasten 4 screws (T25) and remove the lower cover panel from the drive.
2.
Unfasten 5 screws (T20) securing the terminal cover and remove the cover.
1
Lower cover panel
2
Terminal cover
3
Grommet access hole for control wiring
4
Track guide
Illustration 1.1 Terminal Cover Disassembly/Assembly
2
Cable Clamp Kit for E3h/E4h Drives
®
VLT
FC Series FC 102, FC 103, FC 202, and FC 302
5
Slotted drive bracket
6
Plastic gland plate
7
Fastener point
8
Keyhole opening
Danfoss A/S © 04/2018 All rights reserved.
MI35U102