Danfoss iC7 Series Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penggerak DC Danfoss iC7 Series. Danfoss iC7 Series 16 halaman. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Juga untuk Danfoss iC7 Series: Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (18 halaman)

Halaman Cetak
Danfoss iC7 Series Panduan Instalasi
Installation Guide
In-bottom/Out-top Cooling Kit for FA09-FA10
iC7 Series Frequency Converters
1 Overview
1.1 Description
The in-bottom/out-top cooling kit fits FA09 and FA10 frequency converters in Rittal cabinets of 2000 mm (79 in) in height, and 600
mm (24 in) or 800 mm (31 in) wide. When the kit is installed, air flows into the bottom duct and out through the top duct of the
frequency converter. See
Illustration
1
2
3
Illustration 1: Direction of Airflow with Kit Installed
1
Back channel airflow (exhaust)
2
Frequency converter
3
Back channel airflow (intake)
1.2 Kit Numbers
Use these instructions with the following kits.
Table 1: In-bottom/Out-top Cooling Kits
Number
Kit description
176F4038
In-bottom/out-top cooling kit for FA09 frequency converter
176F4039
In-bottom/out-top cooing kit for FA10 frequency converter
Danfoss A/S © 2022.03
1.
4
5
4
Top duct assembly
5
Bottom duct assembly
AN371942791357en-000101 / 136R0254 | 1