Dunavox DAVS-72.185 Buku Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pendingin Anggur Dunavox DAVS-72.185. Dunavox DAVS-72.185 16 halaman.
Halaman Cetak
- 1. Important Safeguards
- 2. For Your Safety
- 3. Product Features
- 4. Installation of Your Appliance
- 5. Before Using Your Appliance
- 6. Reversing the Door Hinge
- 7. Operating Your Appliance
- 8. Use and Control - Single Zone
- 9. Use and Control - Dual Zone
- 10. Temperature Display
- 11. Temperature Memory Function
- 12. Door Alarm
- 13. Care and Maintenance
- 14. Warranty
5. Unscrew and transfer door supporter
opposite side. At the same time remove the stopper
○
pin
,7 of bottom hinge to the opposite designated
position or unscrew and transfer the hinge pin
of bottom hinge to the opposite designated position.
(Fig. 5 & 3)
6. Unscrew and transfer the door adapter
○
catch
,4 to the top designated
position of glass door. (Fig. 2)
7. Rotate the door 180° and relocate the glass door to
the designated position.
hinge on the left designated position and
tighten it. (Fig. 5)
8. Recheck and adjust the door alignment by loosening
○
the screws
,6and moving the door adapter
Tighten the screws
(Fig. 5)
DESIGN 4 – For double door models
1.
Remove the bottom hinge
○
four screws
,2. Be careful to hold the lower glass
○
door
,3 firmly after removing the screws. And then
gently pull down to remove the lower glass door from
the middle hinge and place it on a padded surface
to avoid the risk of damage. (Fig. 1)
2.
Unscrew and transfer the door adapter
to the designated opposite position of lower glass
door. (Fig. 2)
3.
Remove the door adapter
○
two lock screws
,13. Be careful to hold the upper
glass door firmly after removing the screws. And
then gently pull down to remove the upper glass
○
door
,15 from the top hinge and place it on a
padded surface to avoid the risk of damage. Then
remove the right top hinge
○
,10 to the
○
,5 and lock
Then screw the bottom
○
,6 after the door is levelled.
○
,1 by unscrewing the
○
,4 and
○
,14 by unscrewing the
○
,10. (Fig. 5 & 4)
4.
Unscrew and transfer the middle hinge
middle fixing plate
(Fig. 5)
○
,7a
5.
Pop out the cover caps on the left side of cabinet
and use them to
hand side.
6.
Screw the alternative left top hinge
the fittings,
7.
Relocate the door adapter
hinge.
8.
Set the upper glass door to the designated position
and install the two lock screws to connect the door
○
adapter
,14 with the upper glass door and tighten
○
,5.
them before the door is leveled.
9.
Set the lower glass door to the designated position
and reassemble the bottom hinge.
10. Recheck and adjust the lower door alignment by
loosening the screws
door adapter
○
,6 after the door is levelled. (Fig. 5)
11. Transfer the handles and plugs to the opposite
positions.
DESIGN 5 – Models with Articulated Hinge
1
Use extreme caution with the articulated hinges.
The hinge is self-closing and many pinch points
exist prior to built-in installation.
○
,7
1. Remove the cover cap (3) and then remove the glass
door by unscrewing the four screws (1) and (2). Be
careful to hold the glass door firmly after removing the
screws and place it on a padded surface to avoid the
risk of damage.
2. Pop out the cover caps on the left side of cabinet and
use them to
side.
3. Rotate the glass door 180° and refit the glass door to
the opposite side. Then screw and tighten it after the
door is leveled.
7
○
,11 to the opposite position.
cover the screw holes on the right
○
on the left hand side of cabinet. (Fig. 4)
○
,14 on the middle
○
○
,5 &
,6 and moving the
○
○
,4&
,7. Tighten the screws
1
3
2
WARNING
cover the screw holes on the right hand
○
,12 and the
,9 , included in
○
,5 &
2
3