CashConcepts CCE 290 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Penghitung Uang Tunai CashConcepts CCE 290. CashConcepts CCE 290 12 halaman.

CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / www.cce.gmbh
Cleaning of the sensors
By the banknotes and by retreating dust it comes to depositions at the spindle of the machine. This pollution leads to increased
errors and non-recognitions of banknotes.
Please clean at regular intervals the spindle of the CCE 290.
Should you have questions to the right cleaning of the CCE 290, our service team is available to you of course with pleasure.
Valve in counting mode
Valve in cleaning mode
Keep pressing '1' key for 2~3 seconds
and press '1' key once again to enter
the cleaning mode.
Pump motor would be operated.
You can see the two buttons beneath
the machine.
Open the upper case as shown on the
left picture.
Make the valve horizontal to the right
& down direction as shown in the left
picture.
Clean inside of machine with the air hose.
To quit the cleaning job, make the valve
vertical to left & upper direction.
Arrange & roll the air hose inside of the
machine and close the upper case.
Stop the pump motor's operation &
go to normal counting mode via pressing
'C' key.