Dunavox DAB-42.117DB Buku Petunjuk - Halaman 9
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Dapur Dunavox DAB-42.117DB. Dunavox DAB-42.117DB 17 halaman.
Juga untuk Dunavox DAB-42.117DB: Buku Petunjuk (13 halaman), Buku Petunjuk (15 halaman), Manual (15 halaman)
Halaman Cetak
SETTING THE TEMPERATURE
When pressing "Set Upper" or "Set Lower"
button, the system will be entering the set up mode in
the upper or lower compartment automatically. The
LED will be flashing and displaying the setting
temperature.
Press once the button, the temperature will decrease
or increase 1 ºC. When exceeding the minimum value
that can be established, it will jump to the highest
adjustable temperature value automatically. After
stopping pressing the button for 5 seconds, LED
figure will stop flashing, then revert back to display the
temperature of the upper or lower compartment.
After the unit is unplugged, the system will return to
acquiescence temperature, which is the factory
default setting. The acquiescence temperature as
below:
Upper compartment:+ 6 ºC
Lower compartment: +12 ºC
This appliance memorizes and saves its set
temperature. In case of a power outage, the unit
adjusts to its previous temperature setting when
power resumes.
To view the actual temperature. (anytime) press and
hold the up or down button for approximately 5
seconds, the actual temperature will temporarily
"flash" in the LED display for 5 seconds.
Upper compartment: The temperature setting can be
adjusted from +5 ºC to +10 ºC.
Lower compartment: The temperature setting can be
adjusted from +10 ºC to +18 ºC.
The DX-89.246TB, TSS:Temperature setting of upper
and middle zone is same as dual zone above.
Temperature in upper zone can be adjusted from
+5ºC to +18ºC, temperature in middle zone can be
adjusted from +5ºC to +10 ºC.
Temperature setting of lower zone is same as single
zone above. Temperature can be adjusted from
+10ºC to +18ºC.
USE AND CONTROL (DAU-32.78DB, DSS)
Power
RUN
Light
Lower chamner
LIGHT
Control the interior light ON/OFF.
RUN
Indicator light illuminates to signify the cooling mode is
currently in operation.
℃
℃
Set Lower
Set Upper
Upper Chamber
POWER
To control this appliance turn on/off.
"Set Upper" Button
To set the temperature of the upper chamber.
"Set Lower" Button
To set the temperature of the lower chamber.
"Lower Chamber"
Displays
the
set
compartment.
"Upper Chamber"
Displays
the
set
compartment.
Setting The Temperature Controls
The temperature setting range as below:
Upper compartment: 10～18 ºC
Lower compartment: 5～10 ºC
To set up the temperature settings for each
zone. Press once the "Set Lower "
the temperature setting of the Lower zone will
decrease 1ºC, When the temperature setting
reaches the Lower limit 5ºC, the temperature will
return 10ºC.
Press once the " Set Upper " button, the
temperature setting of the Upper zone will
decrease 1ºC. When the temperature setting
reaches the Lower limit 10ºC, the temperature
will return 18ºC.
If you want to know the actual temperature,
please press " Set Upper " or " Set Lower " for
3 seconds, the display panel will show actual
temperature. After 5 seconds, it will return to
show the set temperature.
Attention
If the unit is unplugged, power lost, or turned off, you
must wait 3 to 5 minutes before restart the unit. If you
need attempt to restart before this time delay, the
Wine cooler will not start.
If first time use or if it was out of use for a period of
time, the temperature will vary between setting and
temperature
in
lower
temperature
in
upper
button,