CashConcepts CCE 6000 Panduan Singkat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Singkat untuk Penghitung Uang Kertas CashConcepts CCE 6000. CashConcepts CCE 6000 2 halaman.

Halaman Cetak

Dear customers,

as a supplement to your new CashConcepts CCE 6000, you will find a short instruction how to operate the new banknote counter. You

can download a detailed, multilingual manual on our website at: SERVICE -> USER MANUALS -> BANKNOTE COUNTER

Panel description:

Button

Function

START

Start / Stop counting

CLEAR

Clear

↑↓

Navigate

REPORT

Report

SETUP

Setup

Print function

BATCH

Counting stops

+1/+10

Setup counting stops

ADD

Add function

CUR

Select currency

MODE

Counting mode

Commissioning:

•

Connect the mains plug to the socket and to the CCE 6000 and switch it on.

•

Press the notes against a flat surface so that they are flush on one side of the sheet and place them in the feeder centered with

the flush side facing back. Slide the two banknote feeders against the stack so that the notes can be optimally inserted.

•

If the notes are not centered or inserted flush, incorrect counting or non-detection and sorting of notes may occur.

•

In the case of banknotes suspected of being counterfeit, the stop procedure is set in such a way that the banknotes suspected

of being counterfeit is the top one on the stack.

Counting modes: (Changeover via MODE button)

Display

Function

MIX

Mixed value count

SORT

Sorted count

FREE

Free Count Modus

FREE-UV

Free Count with UV

Cleaning the sensors

Due to the banknotes and the dust that is deposited, there are sediments in front of the sensors of the machine. These impurities lead to

increased sorting out and non-recognition of genuine banknotes. Therefore, please clean the sensors of the CCE 6000 at regular intervals.

When cleaning the machine, generally switch off the machine and pull the mains plug. The red pushbutton on the side allows you to open

the machine easily and gain access to the sensors. With a soft brush and cloth you can also remove the dust from the sensors in the

hopper and stacker area and from the banknote feed wheels. To clean the counterfeit sensors, we recommend the additional use of a

non-flammable compressed air spray and special cleaning cards to remove dirt and fine dust even in inaccessible places. You can order

these utensils from our webshop (www.cce.gmbh).

Starts (at manual start) and stops the counting process of the machine

Deletes the count result or the programmed count stop.

Selecting the pages / options in the setup and report display

Opens the detailed count result

Opens the setup menu for setting the machine functions

Prints the count result on an optional printer

Calls up pre-programmed counting stops, these can be changed using the +1/+10 button,

clearing of the counting stop by pressing the CLEAR button

Pressing shortly increases the activated count stop by 1, holding it down increases it by 10

notes.

Turns on and off the addition function of different counting operations

Switches between programmed and activated currencies

Switches between the different counting modes (see next table)

In this counting mode, you can count unsorted and sorted banknotes by value and have them

evaluated using the report menu (REPORT button).

In this counting mode, the machine stops as soon as a note is detected that differs from the

first note in the stack in terms of its value. This enables you to search through larger quantities

of banknotes of the same size, especially for lower values, and to record the total quantity of

banknotes.

In free count mode, counterfeit detection is deactivated and all types of paper that can be

processed in terms of size can be counted.

As in free-count mode, all types of paper or banknotes can be counted, but these are also

checked for UV characteristics.

CCE – Cash Concepts Europe GmbH – von-Behring-Straße 6a – 88131 Lindau

Tel. +49 (0) 8382 – 943 15 – 0 / Fax +49 (0) 8382 – 943 15 – 20 / [email protected]

CCE 6000

Short Manual

Description