AOM 3A MIX Panduan Penggunaan dan Perawatan - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Penyemprot Cat AOM 3A MIX. AOM 3A MIX 17 halaman.

Halaman Cetak
USE AND MAINTENANCE MANUAL

4.3 TROUBLESHOOTING

The chapter describes how to solve the most common problems which could affect the unit.
The problem is indicated by the following symbol: (6)
The possible cause is indicated by the following symbol: (A)
The possible solution is indicated by the following symbol: (l)
6
IRREGULAR FAN CLOSING?
A
Clogged cap air holes.
A
Damaged joint gasket.
l
Clean the air holes.
l
Replace the gasket.
6
UNEVEN JET?
A
Worn or dirty cap air holes.
A
Worn or dirty nozzle.
l
Clean the gun components carefully.
l
Replace damaged parts.
6
PAINT LEAKS OUT OF THE STUFFING BOX?
A
Worn stuffing box gasket.
A
Loose stuffing box nut.
l
Replace stuffing box.
l
Replace stuffing box nut.
6
PAINT LEAKS OUT OF NOZZLE WITHOUT PULLING THE LEVER?
A
Ball and ball seat dirty of dry paint.
A
Worn ball and ball seat.
ALoose nozzle tip.
A
Dirty nozzle tip cone.
l
Clean the gun parts very carefully.
l
Replace both the ball and seat.
l
Tighten tip.
l
Clean cone and tighten tip.
6
AIR COMES OUT WHEN THE LEVER IS RELEASED?
A
The air valve rod does not slide.
A
Dirt inside the air valve body.
A
Air stuffing box nut too tight.
l
Lightly lubricate gun components.
l
Clean with care.
l
Loosen stuffing box nut.
®
Page 14 of 14