Cashino PTP-III/WF Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Cashino PTP-III/WF. Cashino PTP-III/WF 18 halaman. 3 inch portable thermal printer. ptp-iii series

Halaman Cetak

charge fully if you haven't used the battery for a long time.To keep battery in best

status.

6.2 Battery charging

Put power adapter plug into power socket,and put DC plug into charge connector of

printer.AC:100-240V(50-60Hz)

When charging:battery indicator is blinking.

Charging finished:Battery indicator shows full,and stop blinking.

Note:1.You may destroy printer if you use power adapter,which is not approved or

not provided by our company.

2.Do not take the battery out when it's charging.

3.You can print when it's charging.

4.Please keep printer power on when charging,or it can not charge successfully.

6.3 Paper roll installation

PTP-III printer uses 39mm(diameter) x 80mm(width) thermal paper.

1.Take down the seal on paper roll.

2.Push the open button to open printer cover.

3.Put paper roll into it.

4.Pull out a few paper and close the printer cover.

5.Tear off the rest paper.

Note:1.Please note the direction of the paper roll.You cannot print if put incorrect

direction.

2.Please note to pull out a few paper.

6.4 Preprinted black mark specification

If user wants to locate receipt by detecting preprinted black mark, shall accord to the

following specification for the black mark. Otherwise it may cause printer can't

recognize the black mark.

Printing position: black mark shall preprint at the left side of receipt.

Width rang：≥7mm

Height：4mm≤height≤6mm

Reflection rate to IR：<10% （reflection rate to the black mark on paper >65% ）

Hps：Hps indicates the distance from down edge of detecting mark from beginning

line.

0mm≤Hps≤1mm