Danfoss VLT AutomationDrive FC 302 Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penggerak DC Danfoss VLT AutomationDrive FC 302. Danfoss VLT AutomationDrive FC 302 16 halaman. Igbt module replacement for d1h–d8h drives
Juga untuk Danfoss VLT AutomationDrive FC 302: Panduan Pengoperasian (16 halaman), Panduan Instalasi (20 halaman), Petunjuk Instalasi (4 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Petunjuk Instalasi (12 halaman), Panduan Instalasi (18 halaman), Panduan Petunjuk Instalasi (8 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (8 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (6 halaman)

Installation

Installation Guide | VLT® Programmable I/O MCB 115

Procedure

1. Remove the LCP and the LCP cradle.

2. Fit the option card into slot B.

3. Connect the control cables and relieve the cable. See

for wiring details.

4. Fit the cradle on the drive.

5. Fit the LCP in the cradle.

Illustration 2:

Installation in Enclosure Sizes A5, B1, B2, B4, C, D, E, and F

3.4 Electrical Installation

3.4.1 Specifications

The VLT® Programmable I/O MCB 115 has 3 programmable inputs/outputs, which extend the number of inputs and outputs for the

drive.

AN295938195323en-000101 / 130R0655