Danfoss VLT AutomationDrive FC 360 Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Penggerak DC Danfoss VLT AutomationDrive FC 360. Danfoss VLT AutomationDrive FC 360 4 halaman. 90–315 kw, enclosure sizes j8–j9
Juga untuk Danfoss VLT AutomationDrive FC 360: Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (2 halaman), Panduan Pengoperasian (2 halaman)
Halaman Cetak
Installation Instructions
Illustration 1.1 Remove Plastic Cover
3.
Remove 4 screws (T20, M4x8) that fasten the front
cover to the base plate.
Illustration 1.2 Location of Screws on Top Plate, Example
(Enclosure Type J6)
2
Front Cover
®
VLT
AutomationDrive FC 360
Illustration 1.3 Location of Screws on Bottom Plate, Example
(Enclosure Type J6)
Illustration 1.4 Screws on the I/O Decoupling Plate for Enclosure
Type J6
Danfoss A/S © Rev. 2014-01-17 All rights reserved.
4.
Remove the 2 (for enclosure type J7) or 3 (for
enclosure type J6) screws on the I/O decoupling
plate.
MI06R102