Danfoss VLT FC 103 Panduan Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Penggerak DC Danfoss VLT FC 103. Danfoss VLT FC 103 8 halaman. Igbt module replacement for d1h–d8h drives
Juga untuk Danfoss VLT FC 103: Panduan Pengoperasian (16 halaman), Panduan Instalasi (20 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (18 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Instalasi (6 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (6 halaman)

Halaman Cetak
Danfoss VLT FC 103 Panduan Petunjuk Instalasi
Installation Instructions
1
Relay connection
2
Fuses
3
Motor connection
4
Input/mains connection
Illustration 1.2 A5 Enclosure (Single-phase and 3-phase)
2
Internal Mains Fuse Replacement for VLT
FC 102/FC 103/FC 202/FC 301/FC 302
Enclosure size B
Illustration 1.3, Illustration 1.4, and Illustration 1.5 show the
mains, motor, and relay connection locations for B1 and B2
enclosures.
Motor and relay connections are located under the fuse block
plate. To access these connectors, remove the 3 T20 screws
that are securing the fuse block plate to the drive and lift off
the plate. Do not disassemble the fuse block plate.
1
2
3
4
Illustration 1.3 B1 Enclosure (Single-phase and 3-phase)
Danfoss A/S © 10/2018 All rights reserved.
®
Drives, 0.25–90 kW (0.3–125 hp)
Input/mains connection
Fuse block plate
Motor connection (beneath the fuse block plate)
Relay connection (beneath the fuse block plate)
MI92D402