Danfoss VLT FC Series Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penggerak DC Danfoss VLT FC Series. Danfoss VLT FC Series 12 halaman. Igbt module replacement for d1h–d8h drives
Juga untuk Danfoss VLT FC Series: Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (8 halaman), Panduan Petunjuk Instalasi (6 halaman), Petunjuk Manual (11 halaman), Panduan Instalasi (6 halaman)

Installation Guide | Control Card VLT® FC Series

9. Remove the control card EMC shield.

A If the MCB 159 is installed, lift the left side of the control card EMC shield first, then lift the right side until it is possible to

remove the MCB 159 ribbon cable. Otherwise, there is a risk to destroy the cable or the connector. When the ribbon cable is

removed, the EMC shield is separated from the control card.

1 T10 screws

Illustration 8:

Screws and EMC Shield

10. Unscrew the 3 T10 screws and remove them.

11. Gently remove the control card from the upper-right socket. Avoid overbending and contact with electronic components.

2 Control card

AN279051429263en-000101 / 130R0788 | 9

Replacement