Casio 2220 Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Menonton Casio 2220. Casio 2220 9 halaman. Casio wrist camera watch manual
Halaman CetakAttaching Text to an Image
You can use the following procedure to attach up to 24 characters of text for
each image.
To attach text to an image
1. In the VISUAL DATABANK Mode, use E
(+) and B (–) to display the image to
which you want to attach text.
2. Hold down A for about one second until
the SET menu appears.
SET
• Make sure the pointer is next to NAME on
the menu.
NAME
DEL
Cursor
3. Press F to display the text input screen.
4. Input the text you want.
_
• Use E (+) and B (–) to cycle through
available characters in the sequence shown
below at the current cursor location.
2000. 6.30.
• Holding down either button scrolls at high
PM 10:05
speed.
Press E.
E
Space
A to Z
0 to 9
B
•
~
_
?
• Use D (right) and C (left) to move the cursor.
5. After the text is the way you want, press A or F to save it.
Note
• The watch automatically stores any input text and exits the text input
screen if you do not perform any operation for about two minutes.
• See "To view recorded images" for information about showing and hiding
text attached to images.
Image Sorting
Images in watch memory are automatically sorted according to the first two
letters of their attached text (alpha characters → numbers → symbols).
Images that do not have any attached text come last, sorted according to
their recording dates (oldest first).
• If multiple images have text that start with the same two characters, those
images are sorted according to their recording dates (oldest first).
Deleting Images
You can use the following procedures to delete a specific image or all images
currently stored in watch memory.
To delete all images in watch memory
1. In the VISUAL DATABANK Mode, hold
down A for about one second until the
SET
SET menu appears.
2. Press E to move the pointer to DEL.
NAME
DEL
Pointer
3. Press F to display the DEL (delete) menu.
DEL
ALL
PAGE
Press B.
&
'
(
)
:
.
—
,
4. Press F and a confirmation message
appears on the display.
ALL
5. If you really want to delete all images in
memory, press E to move the pointer to
NO
YES and then press F. To clear the
YES
confirmation message without deleting
anything, leave the pointer at NO and
press F.
• The message WAIT DEL ALL remains on
the display as the delete operation is in
progress. The message EMPTY appears
after the delete operation is complete.
6. After the EMPTY message appears, press D to enter the Alarm Mode or
F to enter the Camera Mode.
• If you do not perform any operation for about two minutes while the SET,
DEL, or ALL menu is on the display, the watch automatically exits the
menu and returns to the VISUAL DATABANK screen.
Note
• You can return to the normal VISUAL DATABANK Mode during the above
procedure by pressing the A button at any point before actually deleting
the image in step 5.
To delete a specific image
1. In the VISUAL DATABANK Mode, use E (+) and B (–) to display the
image you want to delete.
2. Hold down A for about one second until the SET menu appears.
3. Press E to move the pointer to DEL.
4. Press F to display the DEL (delete) menu.
5. Press E to move the pointer to PAGE.
6. Press F and a confirmation message appears on the display.
7. If you really want to delete the image, press E to move the pointer to
YES and then press F. To clear the confirmation message without
deleting anything, leave the pointer at NO and press F.
• The message WAIT DEL PAGE remains on the display as the delete
operation is in progress. The watch automatically clears the message and
returns to the normal VISUAL DATABANK Mode after the delete operation
is complete.
Note
• You can return to the normal VISUAL DATABANK Mode during the above
procedure by pressing the A button at any point before actually deleting
the image in step 7.
TIMEKEEPING MODE
The Timekeeping Mode is the default mode of
PM indicator
the watch when you are not recording images,
Day of the week
using the stopwatch, etc.
• You can use the Viewer Screen to view
Day
images in watch memory.
• See "To set the time and date" for
FRI
3‰
information about setting the time and date,
P
and for selecting either 12-hour or 24-hour
1 ‰ : 5 8
timekeeping.
3 5
Hour : Minutes
Seconds
To reset the seconds count to zero
1. In the Timekeeping Mode, hold down A for about one second until the
seconds digits start to flash on the display. This indicates the setting
screen.
2. Press E to reset the seconds count to 00.
• Pressing E while the seconds count is in the range of 30 to 59 resets the
seconds to 00 and add 1 to the minutes. In the range of 00 to 29, the
minutes count is unchanged.
3. Press A to exit the setting screen and return to the Timekeeping Mode.
Note
• The watch automatically exits the setting screen if you do not perform any
operation for about two minutes.
To switch between Timekeeping Mode screen formats
In the Timekeeping Mode, each press of C toggles between the two screen
formats shown below.
Day of the week
Day
FRI
3‰
P
1 ‰ : 5 8
3 5
2220-4
Month
Day
6 - 3‰
P
1 ‰ : 5 8
3 5