Casio 2246 Panduan Umum

Jelajahi secara online atau unduh pdf Panduan Umum untuk Menonton Casio 2246. Casio 2246 2 halaman.

Module No. 2246

• Press B to change from mode to mode.

• Pressing L in any mode illuminates the display for about 2 seconds.

• If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen.

• If you do not perform any operation for a few minutes in the Day Counter Mode or Telememo Mode, the watch automatically reverts to the normal timekeeping screen.

Timekeeping Mode

TIMEKEEPING MODE

• Hold down C to toggle between 12-hour and 24-hour timekeeping.

• Press C to toggle the upper display between day of the week and animation.

Day of week

Hour : Minutes

PM indicator

Day

• With 12-hour timekeeping, times between midnight and noon are indicated by AM,

while times between noon and midnight are indicated by PM.

• The AM and PM indicators do not appear when you are using 24-hour timekeeping.

To set the time and date

1. While in the Timekeeping Mode, hold down A until the

2. Press B to move the flashing in the sequence shown below.

Seconds

Day

3. While the seconds setting is selected (flashing), press C to reset it to 00. If you

press C while the seconds setting is in the range of 30 to 59, the seconds are

reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of

00 to 29, the minutes count is unchanged.

4. While the DST ∗ setting is selected (DST on indicator is flashing), press C to toggle

it on (on) and off (OF).

5. While any other setting is selected (flashing), press C to increase it. Holding down

C changes the setting at high speed.

6. After you make the settings you want, press A to exit the setting screen.

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 2000 to December 31, 2039.

• The watch's built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after the replacement of the watch's battery.

∗ Daylight Saving Time (DST), which is also sometimes called "summer time"

advances the time for one hour, as is the custom in some areas during the

summer. Remember that not all countries or even local areas use Daylight Saving

Time.

ABOUT THE BACKLIGHT

Press L to illuminate the display for about 2 seconds.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illuminating power after very long term use.

• Frequent use of the backlight shortens the battery life.

• The watch emits an audible sound whenever the display is illuminated. This does

not indicate malfunction of the watch.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The backlight automatically turns off whenever an alarm sounds.

Day Counter Mode

Press B.

Press

Seconds

DST on indicator

seconds digits flash on the display, indicating the

setting screen.

DST

Hour

Month

Year

Minutes

GENERAL GUIDE

Telememo Mode

The Day Counter Mode lets you count the number of days from the Timekeeping

Mode's current date to a specific target date.

This watch has ten day counters. Whenever the date specified by a day counter

matches the date of the Timekeeping Mode (regardless of the day counter's year

setting), the DAYS indicator flashes on the Timekeeping Mode screen.

The initial default date for all Day Counters is January 1, 2001.

Mode indicator

Text area

Year Month - Day

Target date

Day counter number

• The day counter on the display when you exit the Day Counter Mode appears first

the next time you enter the Day Counter Mode.

Recalling Day Counter Data

In the Day Counter Mode, use C to scroll through the day counters.

To set the target date

1. In the Day Counter Mode, use C to display the number of the day counter you

want to set.

2. Hold down A until the flashing cursor appears in the text area. This indicates the

input screen.

3. Press B to move the flashing in the sequence shown below.

• Hold down B to move the cursor at high speed.

4. While the cursor is in the text area, use C to scroll through characters at the

current cursor position. Characters scroll in the sequence shown below. Holding

down C scrolls at high speed.

(Space)

5. While the cursor is in the date area, press C to increase the number. Holding down

C changes the setting at high speed.

• To clear a Day Counter record, press C and L at the same time while the

cursor is in either the text area or number area. The message "CLR" appears on

the display, the characters in the text area are deleted, and today's date is set as

the target date. After the clear operation is complete, you can create a new record

by changing the date setting.

6. After you make the settings you want, press A to exit the input screen.

• The date can be set within the range of January 1, 1940 to December 31, 2039.

• The display can show only three name characters at a time. Longer names scrolls

continuously from right to left. The symbol " " indicates that the character to the

left is the last, and the character to the right is the first.

Alarm Mode

DAY COUNTER MODE

Alternates at

2-seconds

intervals.

DAYS indicator

1st digit

8th digit

Day

Month

Year

A to Z

0 to 9

2246-1

Number of days