Danfoss 140F1080 Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Termostat Danfoss 140F1080. Danfoss 140F1080 16 halaman. Electronic thermostat

DEVIreg™ 610

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

Please also note the following:

•

The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

•

The thermostat must be connected to a power supply

via an all-pole disconnection switch.

•

The sensor is to be considered as live voltage. Have

this in mind if the sensor must be extended.

•

Always connect the thermostat to continuous power

supply.

•

Do not expose the thermostat to moisture, water,

dust, and excessive heat.

Installation Guide

100 x 69,5 x 45 mm

165 g