Dunelm 30151381 Manual

Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan Dunelm 30151381. Dunelm 30151381 3 halaman.

DEAR CUSTOMER

Thank you for purchasing your new piece of furniture from Dunelm.

We put a lot of e ort in the design and construction of our products to ensure they set the

standard for quality, durability and ease of assembly.

If for any reason you feel we haven't lived up to the high standards we set ourselves, please

don't hesitate in contacting us on 08451 656565 where our team will be very keen to

understand what has gone wrong and, more importantly, put it right.

The next step...

There is no need to feel daunted by the number of parts and ttings in front of you, we have compiled

this straight forward, step-by-step guide to make sure that assembling your furniture is as easy as 1, 2,

Before you begin, we advise that you check that you have everything you need to get started.

TOP TIP

Find a space to spread these out across the oor before you begin assem-

bling them. Lay each panel down in position, ready to build.

It is recommended that two people assemble this product together.

The full list of furniture parts, xtures and ttings, as well as the tools you will need for assembly, can be

found on page 2 of this manual.

TOP TIP

Identify all of the ttings, make sure that you have them all prepared and

familiarise yourself with each component, to make things easier when you

are putting it all together.

Safety and Care Advice

IMPORTANT - The rst step you need to take is to ensure your safety!

Please take the time to read and understand these instructions before assembling your furniture.

Keep children and animals away from the assembly area.

This furniture contains small parts that could cause choking if swallowed.

Keep all plastic wrapping materials away from children to avoid danger of su ocation.

Ensure that all packaging is disposed of carefully and responsibly.

Make sure that you allow enough space to move around when assembling your furniture.

The use of power tools to assemble the product is not recommended due to the risk of over

tightening xings.