Danfoss DEVIreg 330 Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Termostat Danfoss DEVIreg 330. Danfoss DEVIreg 330 12 halaman. Electronic thermostat -10 to +10 c
Juga untuk Danfoss DEVIreg 330: Panduan Instalasi (12 halaman), Panduan Instalasi (12 halaman)

Halaman Cetak

Settings

If a floor sensor is used, please be aware of the following:

• The floor temperature is measured where the sensor is

placed.

• The temperature of the bottom of a wooden floor can

be up to 10 degrees higher than the top.

• Floor manufactures often specify the max temperature

on the top surface of the floor (usually 27-28˚C).

• Always use a floor sensor to control floor heating.

Without a floor sensor, the temperature control may be

less accurate and you risk overheating the floor.

Thermal

Examples of

resist-

flooring

ance

[m²K/W]

0,05

8 mm HDF based

laminate

0,10

14 mm beech

parquet

0,13

22 mm solid oak

plank

< 0,17

Max. carpet

thickness suitable

for floor heating

0,18

22 mm solid fir

planks

DEVIreg™ 330 (+5 to +45°C)

Details

> 800 kg/m³

650 - 800 kg/m³ 31˚C

> 800 kg/m³

acc. to EN 1307 34˚C

450 - 650 kg/m³ 35°C

Approximate

setting for

25˚C floor

temperature

28˚C

32˚C

Installation Guide