Danfoss ECL Comfort 110 Panduan Pengguna, Instalasi & Pemeliharaan - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna, Instalasi & Pemeliharaan untuk Termostat Danfoss ECL Comfort 110. Danfoss ECL Comfort 110 19 halaman. Application 130
Juga untuk Danfoss ECL Comfort 110: Lembar data (8 halaman), Panduan Instalasi (8 halaman), Manual Pemasangan (8 halaman), Panduan Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Cepat (2 halaman)
Halaman Cetak
How to identify your system type
The ECL Comfort controller is a universal controller that can be used for various systems.
Based on the shown standard systems, it is possible to configure additional systems.
In this section you find the most frequently used systems. If your system is not quite as
shown below, find the diagram which has the best resemblance with your system and
make your own combinations.
Heating system 1:
Constant DHW temperature control with heat exchanger
Heating system 2:
Constant temperature control of the DHW circuit with storage tank with built-in
heating coil
28
VI.KT.F2.02
© Danfoss 06/2008
DH-SMT/DK
Adapting the ECL Comfort 110 controller
When you switch on the controller the first time, it will ask you to choose language
(default language is English).
Choose your language.
Accept and go to the next menu.
When the language is chosen, the controller will ask for date and time setting.
Set day (dd), month (mm), year (yy), hour (hh), and minuts (mm).
Use the minus and plus buttons to change values and the arrow buttons to shift
between the settings.
Accept the chosen time and date.
When the language has been chosen, and date and time have been set, the controller
will ask for application type.
Choose application type.
2 sec.
Start the chosen application.
Go to the 'Maintenance' part for further setup of your controller.
VI.KT.F2.02
DH-SMT/DK
© Danfoss 06/2008
29