Danfoss ECL Comfort 310 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Termostat Danfoss ECL Comfort 310. Danfoss ECL Comfort 310 8 halaman. A302
Juga untuk Danfoss ECL Comfort 310: Panduan Instalasi (8 halaman), Manual Pemasangan (4 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (12 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Servis (16 halaman), Panduan Pengoperasian (8 halaman), Panduan Pengoperasian (16 halaman), Panduan Pengoperasian (10 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (7 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (12 halaman), Manual Pemasangan (20 halaman), Manual Pemasangan (20 halaman), Manual Pemasangan (12 halaman), Manual Pemasangan (16 halaman)

Operating guide

3.5 Select wireless network to be used for wireless bridge

The Netgear wizard asks for wireless network to be used by the wire-

less bridge. Select the wireless network.

The Netgear wizard now asks for the password to the selected wire-

less network. Enter the password.

The wireless bridge is then completing the conﬁguration and the

ethernet connection on the side of the wireless bridge can now be

connected to the ECL Comfort 296 / 310.

3.6 Conﬁgure ECL Comfort 296 / 310 controller to local net-

work

The ECL Comfort 296 / 310 controller must be conﬁgured to con-

nect to the local network (LAN).

If the ECL Portal is used as SCADA system then the ECL Comfort

296 / 310 must be conﬁgured for DHCP instead of STATIC in the

System>Ethernet menu and the ECL Portal feature must be ena-

bled in the System>Portal Conﬁg menu.

ECL 296 / 310 Comfort to WLAN

Enter passphrase for the selected wireless network.

If used with ECL Portal: Conﬁgure for DHCP.

Enable the ECL Portal in the Portal Conﬁg menu.

AQ070386470176en-010301