Dunelm DUN30735021 Manual - Halaman 9
Jelajahi secara online atau unduh pdf Manual untuk Pembuat Roti Dunelm DUN30735021. Dunelm DUN30735021 17 halaman.
Halaman CetakHOW TO MAKE BREAD
1. Place the pan in position, then turn it clockwise until they click in correct position.
Fix the kneading blade onto the drive shafts. Turn the kneaders clockwise until
they click into place. It is recommended to fill holes with heat-resisting margarine
prior to placing the kneaders, this avoids the dough to stick below the kneaders
and the kneaders could be removed from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in
the recipe.Usually the water or liquid substance should be put firstly, then add
sugar, salt and flour, always add yeast or baking powder as the last ingredient.
In case of heavy dough with high Rye or wholemeal portion we advise to reverse
the order of ingredients. i.e. to fill in first the dry yeast and flour, and finally the
liquid to get a better kneading result.
Note: the maximum quantities of the flour and yeast which may be used refer to
the recipe.
3. With finger make a small indentation on one side of the flour. Add yeast to
indentation,
Make sure it does not come into contact with the liquid ingredients or salt.
1. Put bread slice into the bread slot which can be inserted two slices at most
4. Close the lid gently and plug the power cord into a wall outlet.
every time. Only the regular slice can be placed into the bread slot. The
5. Press the Menu button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
irregular bread can only be toasted on the toast rack.
7. Press the LOAF SIZE button to select the desired size (1.5LB or 2.0LB).
NOTE: Make sure the crumb tray is completely positioned in place before
8. Set the delay time by pressing Time+ or Time- button. This step may be skipped
using.
if you want the bread maker to start working immediately.
2. Plug the power cord into the outlet.
9. Press the START/STOP button to start working.
3. Set color control slide key to your desired color. There is 7-position level, the
10.For the program of BASIC, FRENCH, WHOLE WHITE , SWEET, GLUTEN FREE,
lowest "1" is for light and the highest "7" is for dark. The bread slice can be
SANDWICH, a long beep sound will be heard during operation. This is to prompt
toasted to golden color at the middle position.
you to add ingredients. Open the Lid and put in some ingredients. It is possible
NOTE:
that steam will escape through the vent slits in the lid during baking. This is
1). Toasting color for one slice is darker than that for two bread slices at the
normal.
same level.
11.Once the process has been completed 10 beeps sound will be heard. You can
press START/STOP button for approx. 3-5 seconds to stop the process and take
2). If toasting continuously, toasting color for the latter bread is darker than
out the bread. Open the Lid and while using oven mitts, firmly grasp the bread
that for the anterior bread at the same level.
pan handle. Turn the pan anti-clockwise and gently pull the pan straight up and
4. Lower carriage handle down vertically until it is latched in place, the indica-
out of the machine.
tor of Cancel will be illuminated, and the appliance will begin toasting at
12. Use non-stick spatula to gently loosen the sides of the bread from the pan.
once.
Caution: the Bread pan and bread may be very hot! Always handle with care and
NOTE: The carriage handle can only be latched when the appliance is
use oven mitts.
plugged in.
13.Turn bread pan upside down onto a clean cooking surface and gently shake
5. Once the bread has been toasted to the preset color, the carriage handle
until bread falls out onto rack.
14.Remove the bread carefully from the pan and cool for about 20 minutes before
slicing.
Yeast or soda
Dry ing redients
Wate r or liquid
7