Danfoss EFET 132 Instruksi - Halaman 4

Jelajahi secara online atau unduh pdf Instruksi untuk Termostat Danfoss EFET 132. Danfoss EFET 132 12 halaman.

2. Installation instructions

2.a Installation of sensor for EFET 130, and 132.

The ﬂ oor sensor should be mounted in a 16 mm installa-

tion pipe which is sealed at the end to prevent penetration

of concrete into the pipe. Minimum bending radius for the

pipe is 50 mm.

The sensor cable must

be placed in between

two strings of the

Thermostat

heating cable.

2.b Placement of

EFET 130, 131,

and 132.

To avoid cracks

in the concrete

ﬂ oor you must

ensure that the

110 cm

ﬂ oor is completely

hardened before the

Away from doors and windows

heat is switched on.

(at least 50 cm)