Danfoss FP715Si Panduan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Termostat Danfoss FP715Si. Danfoss FP715Si 20 halaman. Electronic 2-channel full programmer for
heating and hot water with service interval timer
Juga untuk Danfoss FP715Si: Petunjuk Pengguna (2 halaman)
Halaman Cetak
3.2 DIL Switch Settings
Before mounting the unit, ensure the 4 DIL switches on the rear have
been moved to the required settings.
GB
Tick the INSTALLER SETTING box on the inside fl ap label to notify user
in which mode their unit is set (24hr, 5/2 day or 7 day).
4.0 Advanced Programming Options
To enter advanced programming press PROG, + and DAY/HOL
together and hold for 5 seconds.
Option 1 - (3 or 2 On/Off s per day)
Use + or - to change between 3 or 2 on/off s each day.
3 on/off s each day (Factory setting)
Option 2 - (Disable or enable auto time change)
Press NEXT, then use + or - to change between auto time change
enabled to auto time change disabled.
Auto time change enabled (Factory setting)
6
Sw.1
Not Used
Sw.2
Gravity
5/2 Day
Sw.3
Sw.4
7 Day
INSTALLER SETTING
24 Hour
5+2 Day
7 Day
3
Not Used
Pumped
7 Day or 24 Hour
24 Hour
2
2 on/off s each day
Auto time change disabled
FP715SI