Danfoss RET2000 MS Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Termostat Danfoss RET2000 MS. Danfoss RET2000 MS 13 halaman. Electronic digital thermostat with lcd
Halaman Cetak
Thermostat standby
To place the thermostat into standby (off ), press the V arrow
GB
twice to enter the temperature setting mode. When in heating
mode press and hold the V arrow until the set temperature
disappears and the standby symbol appears. In cooling mode
press and hold the Λ arrow until the standby symbol appears.
When in standby the thermostat will have no control of the
heating or cooling system.
To exit standby press and hold the Λ arrow (V arrow in cooling
mode) until the required set temperature is fl ashing on the
display.
Danfoss Heating
9