Danfoss TP7001 series Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Termostat Danfoss TP7001 series. Danfoss TP7001 series 20 halaman. Electronic 7 day programmable room thermostat
Juga untuk Danfoss TP7001 series: Petunjuk Pengguna (2 halaman), Panduan Cepat (4 halaman)

Halaman Cetak

Option 31 - Set Temperature Lower Limit

This allows the lower limit of the thermostat setting

range to be limited. Press + until Option 31 is

displayed, use V or Λ to select required setting.

Can be set to any value between 5.0ºC and 40.0ºC in

0.5ºC steps

Factory setting = 5ºC

Option 32 - Enable Off at Lower Limit

This enables an OFF function to be selected if a set

point below the lower limit is selected. Press + until

Option 32 is displayed, use V or Λ to select required

setting.

0 = Disabled

1 = Enabled (Factory setting)

Option 33 - Enable On at Upper Limit

This enables an ON function to be selected if a set

point above the upper limit is selected. Press + until

Option 33 is displayed, use V or Λ to select required

setting.

0 = Disabled (Factory setting)

1 = Enabled

Option 34 - Select On/Off or Chrono-Proportional

This allows the thermostat to be set to run in On/Off

mode or for a chrono-proportional cycle rate to be

selected. Press + until Option 34 is displayed, use V or

Λ to select required setting.

0 = On/Off

3 = 3 cycles/hour

6 = 6 cycles/hour (Factory setting)

9 = 9 cycles/hour

12 = 12 cycles/hour

Danfoss Heating