Danfoss ECL Comfort 210 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol Danfoss ECL Comfort 210. Danfoss ECL Comfort 210 12 halaman. Extended heat cut-out
Juga untuk Danfoss ECL Comfort 210: Panduan Pengguna (12 halaman), Panduan Pengguna (6 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (20 halaman), Panduan Pengoperasian (16 halaman), Panduan Pengoperasian (10 halaman), Panduan Instalasi (7 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (16 halaman), Manual Pemasangan (16 halaman)

6.0 Holiday program

There is a holiday program for each circuit and a

common holiday program for all circuits.

Each holiday program contains one or more

schedules. It can be set to a start date and an end

date. The set period starts on the start date at

00.00 and stops on end date at 24.00.

The end date must be at least one day later than

the start date.

How to set your holiday schedule:

Action: Purpose:

Choose 'MENU'

Confirm

Choose the circuit selector at

the top right corner in the

display

Confirm

Choose a circuit or 'Common

controller settings'

Confirm

Go to 'Holiday'

Confirm

Choose a schedule

Confirm

Confirm choice of mode selector

Choose mode:

• Comfort

• Comfort 7-23

• Saving

• Frost protection

Confirm

Enter start time first and then

the end time

Confirm

Go to 'MENU'

Confirm

Choose 'Yes' or 'No' in 'Save' .

Choose the next schedule, if

required

VI.KT.Y2.02

The holiday program in the 'Common

controller settings' is valid for all circuits.

The holiday program can also be set

individually in the heating or DHW circuits.

Examples:

7-23