Airwell 24 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pendingin Udara Airwell 24. Airwell 24 11 halaman. Had/jad/dha wall mounted range dc inverter

Halaman Cetak

Air intake grill

Air filter

Air purifying filter

Horizontal Louver

Vertical Louver

Bipolar Ionizer (option)

On unit operation (Button/indicator)

Unit`s indicatiors

Power cord (optional)

Part names and function

A Bipolar ionizer LED

There is a flashing LED to assure

the ion output functionality.

In case that the LED is not flashing,

the cleaning pad has to be moved

once to another side and back to

the original position (close to the LED)

for cleaning.

B Bipolar ionizer cleaning pad

The cleaning pad not only have the

cleaning function, but also it can switch

the ionizer ON/OFF.

Position 1(Close to LED): ON

Position 2(Far away from LED): OFF

C Standby indicator

This indicator will light up when the unit

is on Standby. It will turn off when unit is

in operation.

D Bipolar ionizer indicator

The indicator will light up when Bi-Polar

ionizer is activated via remote control. It

will light up for about 15 seconds before

goes off. (only applicable to units fitted

with Bi-Polar Ionizer)

E Timer indicator

The indicator will light up when Timer

or Sleep operation is activated. During

this mode, upon receiving any signal

from Remote Control (RC), the light

will come up strong and deemed after

about 15 seconds.

Filter indicator

If the indicator light up (for about 30

seconds after display is going off), it

means that filter should be cleaned.

The indicator will light up again every

time a signal is received from RC, until

it is reset. To reset the filter indicator,

press the reset button (J) and release