Danfoss vlt soft starter mcd 500 Panduan Petunjuk Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Unit Kontrol Danfoss vlt soft starter mcd 500. Danfoss vlt soft starter mcd 500 17 halaman. Usb module
Juga untuk Danfoss vlt soft starter mcd 500: Panduan Petunjuk Instalasi (6 halaman), Petunjuk Instalasi (5 halaman)
Halaman Cetak
Trip Codes
7. Trip Codes
Trip
Code
Trip Name
1
Excess start time
2
Motor overload (thermal model)
3
Motor thermistor
4
Current imbalance
5
Frequency (Mains supply)
6
Phase sequence
7
Instantaneous overcurrent
8
Power loss (Power circuit)
9
Undercurrent
10
Heatsink overtemperature
11
Motor connection
12
Input A trip (Auxiliary input A)
13
FLC too high (FLC out of range)
14
Unsupported option (Not available in 6-wire)
15
Starter communication
16
Network communication
17
Internal fault
23
EEPROM fail
26
L1 phase loss
27
L2 phase loss
28
L3 phase loss
29
L1-T1 Shorted
30
L2-T2 Shorted
31
L3-T3 Shorted
33
Time-overcurrent (Bypass overload)
35
Battery/clock
36
Thermistor circuit
255
No trip
MG.17.F5.02 - VLT® is a registered Danfoss trademark
MCD Modbus Module Instructions
6