Danfoss PAH 10-12.5 Petunjuk Pembongkaran dan Perakitan - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Pembongkaran dan Perakitan untuk Pompa Air Danfoss PAH 10-12.5. Danfoss PAH 10-12.5 20 halaman.

Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5

13. Loosen the valve plate using two

screwdrivers. Place one of the

screwdrivers in the slot of the valve plate.

15. Remove the five O-rings and the five

back-up O-rings.

17. Wash all parts and replace all seals

(inclusive shaft seal).

19. If the pump has failed, the reason for the

failure must be found and fixed before the

repaired pump is re-installed.

180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017

14. Remove the valve plate.

16. Remove the port plate from the flange.

18. Inspect all parts carefully (see "Inspection")

and replace any worn parts.