Dunlop MXR Phase 90 Panduan Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pedal Musik Dunlop MXR Phase 90. Dunlop MXR Phase 90 2 halaman.
Halaman Cetak
CSP026 VINTAGE PHASE 90
DESCRIPTION
• Hand-wired circuit board built with
original-spec 1975 components
• Original high-quality Switchcraft
Input/Output jacks and Carling
bypass switch
• Hand-selected FETs, matched to
produce deep and rich phasing
• All-analog circuitry
POWER
The MXR Vintage Phase 90 is powered by
one 9-volt battery, accessed by removing
the bottom plate of the pedal.
CONTROLS
• SPEED knob regulates overall
effect rate
• FOOTSWITCH toggles effect
on/bypass
DIRECTIONS
• Run a cable from your guitar to the
Vintage Phase 90's INPUT jack and run
another cable from the Vintage Phase
90's OUTPUT jack to your amplifier.
• Set the Vintage Phase 90's Speed
control knob to the 12 o'clock position.
• Turn the effect on by depressing
the footswitch.
• Rotate the SPEED knob clockwise for a
faster phase effect or counterclockwise
for a slower effect.
SAMPLE SETTINGS
CLASSIC ' 80s ROCK
PSEUDO LESLIE
9:00
12:00
SPECIFICATIONS
Input Impedance
470 kΩ
Output Impedance
10 kΩ
Max Input Level
-5 dBV
Signal to Noise Ratio*
> 95 dB
Current Draw
2.2 mA
Power Supply
9-volt battery
*All controls at mid position, A-weighted,
V
1V
REF =
RMS