Danfoss iC7 Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media Danfoss iC7 Series. Danfoss iC7 Series 16 halaman. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Juga untuk Danfoss iC7 Series: Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (18 halaman)

In-bottom/Out-top Cooling Kit for FA09-FA10

Installation Guide

16 (0.6)

6x Ø 6 (0.2)

Illustration 4: FA10 Rittal Cabinet Top Plate Template

2.4 Creating a Vent Opening in the Base Plate

To create a vent opening in the base plate for the bottom duct, use the following steps. Use the dimensions in

frequency converters, and

Illustration 6

Procedure

Cut out the vent opening in the cabinet base plate using the dimensions in the template.

Drill 6 screw holes (4 mm) around the vent opening using the dimensions in the template.

The holes must match the holes in the lower flange of the bottom duct.

323 (12.7)

291 (8.6)

56 (2.2)

180 (7.1)

for FA10 frequency converters.

Installation

8 (0.3)

128 (5.0)

138 (5.5)

17 (0.7)

Illustration 5

for FA09

AN371942791357en-000101 / 136R0254