Danfoss iC7 Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media Danfoss iC7 Series. Danfoss iC7 Series 16 halaman. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Juga untuk Danfoss iC7 Series: Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (18 halaman)

In-back/Out-top Cooling Kit for FA09-FA10

Installation Guide

16 (0.6)

6x Ø 6 (0.2)

Illustration 4: FA10 Rittal Cabinet Top Plate Template

2.4 Preparing the Mounting Plate

To create mounting holes and a vent opening in the mounting plate, use the following steps. Use the dimensions in

FA09 frequency converters, and

Procedure

Drill 4 mounting holes in the mounting plate using the dimensions in the template.

The holes must match the holes in the frequency converter.

Insert 4 M10 pem nuts (not supplied) in the mounting holes.

Cut out the vent opening in the mounting plate using the dimensions in the template.

The opening must match the opening in the lower duct.

323 (12.7)

291 (8.6)

56 (2.2)

180 (7.1)

Illustration 6

for FA10 frequency converters.

Installation

8 (0.3)

128 (5.0)

138 (5.5)

17 (0.7)

Illustration 5

AN371942666355en-000101 / 136R0250

for