Danfoss VLT 6000 Petunjuk Pembongkaran dan Pemasangan - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pembongkaran dan Pemasangan untuk Konverter Media Danfoss VLT 6000. Danfoss VLT 6000 6 halaman. Adjustable frequency drive option enclosure

Halaman Cetak

CAUTION

A forklift or other lifting device with a qualified

operator is needed to remove the option enclosure

from the crate.

Unpacking the Option Enclosure

Remove the option enclosure shipping crate in accordance

with the following instructions.

1. Remove top panel of crate by prying up metal locking

tabs that secure top panel (see figure 2). This allows

access to lifting rings located on top of option enclosure.

2. Use a forklift or other lifting device to ensure stability of

option enclosure. Position lifting device securely.

3. Use a spreader bar or similar device to distribute weight

evenly on all four lifting rings (see figure 3). Lift option

enclosure several inches to clear crate bottom for

removal.

4. Remove remaining crate panels by prying up metal

locking tabs.

Locking tab

Figure 2. Shipping Crate (1200 mm shown)

CAUTION

DO NOT lift unit in the following manner. Damage

to casing may result, making front door panels

inoperable.

Proper lifting method

Figure 3. Option Enclosure Lift

Positioning

After unpacking, the enclosure option is ready to be lifted

prior to mounting on the base.