Danfoss VLT AutomationDrive FC 301 Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media Danfoss VLT AutomationDrive FC 301. Danfoss VLT AutomationDrive FC 301 6 halaman. 24 v dc supply
Juga untuk Danfoss VLT AutomationDrive FC 301: Panduan Instalasi (20 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (18 halaman), Panduan Petunjuk Instalasi (8 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Petunjuk Instalasi (6 halaman)

Installation Guide

VLT® 24 V DC Supply MCB 107

VLT® Series FC 102, FC 103, FC 202, and FC 301/FC

302

1 Scope of Delivery, Safety, and Installation

1.1 Purpose of the Manual

This installation guide describes the installation of the VLT

1.2 Purpose of the VLT® 24 V DC Supply MCB 107

VLT

24 V DC Supply MCB 107 option is a low voltage supply to the control card or any option card installed. This option keeps the

control section (including parameter configurations) and any installed option alive during a power failure.

External power supply

To achieve the intended functionality, an external 24 V DC supply as specified below has to be connected to the terminals of

the option.

Specifications for VLT 24 V DC Supply MCB 107

Specification

Input voltage range

Maximum input current

Average input current for FC 301/FC 302

Maximum cable length

Input capacitance load

Power-up delay

Connection terminals

•

Terminal 35: - external 24 V DC supply

•

Terminal 36: + external 24 V DC supply

24 V DC Supply MCB 107.

N O T I C E

Value

24 V DC ±15% (maximum 37 V for 10 s)

2.2 A

0.9 A

75 m (246 ft)

<10 uF

<0.6 s

AN287957936346en-000101 / 130R0308 | 1