Casio CFX-9970G Panduan Komunikasi Data - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Komunikasi Data untuk Kalkulator Casio CFX-9970G. Casio CFX-9970G 12 halaman. 3. numerical calculations
Juga untuk Casio CFX-9970G: Panduan Pengguna (18 halaman), Manual (16 halaman), Manual (12 halaman), Manual (12 halaman), Manual (11 halaman), Manual (11 halaman), Manual (8 halaman), Manual (14 halaman), Manual (18 halaman), Manual (13 halaman), Manual (19 halaman), Manual (9 halaman), Manual (14 halaman), Lampiran (15 halaman)

Halaman Cetak

22-6 Screen Send Function

The following procedure sends a bit mapped screen shot of the display to a

connected computer.

u u u u u To send the screen

P.416

1. Connect the unit to a personal computer or to a CASIO Label Printer.

P.417

2. In the data communication main menu, press 6 (IMGE) and the following

3. Press a function key to specify either "Monochrome" or "Color" for the Image

4. Display the screen you want to send.

5. Set up the personal computer or Label Printer to receive data. When the other

P.417

You cannot send the following types of screens to a computer.

display appears.

• {OFF} ... {graphic images not sent}

• {MONO}/{COLR} ... {monochrome}/{color} bitmap

Set Mode.

unit is ready to receive, press M to start the send operation.

• Selecting "Monochrome" for Image Set allows data to be sent to any CASIO

Label Printer equipped with data communications capabilities.

Selecting "Color" allows data to be sent to Color Label Printer models only.

• The screen that appears while a data communication operation is in progress.

• A screen that appears while a calculation is in progress.

• The screen that appears following the reset operation.

• The low battery message.

• The flashing cursor is not included in the screen image that is sent from the

unit.

• If you send a screen shot of any of the screens that appear during the data

send operation, you will not be able to then use the sent screen to proceed

with the data send operation. You must exit the data send operation that

produced the screen you sent and restart the send operation before you can

send additional data.

• You cannot use 6mm wide tape to print a screen shot of a graph.

3 4 5 6

422